N30 Nano Series RF RGB LED controller

N30 RGB LED controller is designed to drive constant voltage LED products with common anode connection in voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup RGB LED color, brightness and dynamic modes on the remote controller, the main unit is powered by DC power supply and receives remote controller commands to drive LED fixtures.

  • Control Mode: Classic RF
  • Working Voltage: Constant Voltage PWM

n Introduction

N30 RGB LED controller is designed to drive constant voltage LED products with common anode connection in voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup RGB LED color, brightness and dynamic modes on the remote controller, the main unit is powered by DC power supply and receives remote controller commands to drive LED fixtures. 

Rayrun website

Rayrun website

n Features

Rayrun website

n Wiring Diagram

Rayrun website


Nano RF Wireless CCT / RGB / RGBW LED controller
ModelN20N21N30N40
FunctionCCTDual wire CCTRGBRGBW
Electrical Specification
Working Voltage DC 5-24V 
Rated Output Current2x5A5A3x4A4x3A
Remote ControlRF wireless remote controller
Remote Control Frequency433.92MHz
Remote Control BatteryCR2032 3V cell battery
Remote Transmit Power<10dBm
Remote Distance>15 meters in open area
Remote Controller Matching ModeEach unit can be matched to 5 remote controllers
 / remote controller can be matched to any receiver
PWM Output Grade4000 Levels
PWM Frequency1KHz
Protection FunctionWrong wiring / Overload / Short circuit / Overheat
Working Temperature -30~60℃
IP GradeIP-40
Components & PCBSMD parts / FR-4 pcb
Functions
Brightness Level11 levels5 levels10 for white,
5 for RGB
Color Temperature, Color7 levels CCT30 colors30 colors
Dynamic ModeNANA42 modes42 modes
Dynamic Speed LevelNANA10 levels10 levels
Smooth FadingYes
Power Off MemoryYes
Power & LED Connector
Power ConnectorSlot screw block terminal, max 12AWG cable
LED ConnectorSlot screw terminal, max 17AWG each slot (max 12AWG for N21)
Dimension & Weight
DimensionMain unit: 87x24x15mm, Remote: 86.5x36x7.5mm
Net Weight 38g 



Click to download user's manual




TAG: Classic RF