N40 Nano Series RF RGBW controller

N40 RGB+W LED controller is designed to drive constant voltage LED products with common anode connection in voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup white LED brightness, RGB LED color, brightness and dynamic modes on the remote controller, the main unit is powered by DC power supply and receives remote controller commands to drive LED fixtures.

  • Control Mode:Classic RF
  • Output Mode:Contant Voltage PWM
  • Power Voltage:DC 5-24V
  • Output Current:3x2.5A+4A,3x3.5A+6A(S version)

n Introduction

N40 RGB+W LED controller is designed to drive constant voltage LED products with common anode connection in voltage range of DC5-24V. The main unit works with a RF remote controller, user can setup white LED brightness, RGB LED color, brightness and dynamic modes on the remote controller, the main unit is powered by DC power supply and receives remote controller commands to drive LED fixtures.Rayrun website

Rayrun website

n Features

Rayrun website

n Wiring Diagram

Rayrun website



TAG:   Classic RF Overheat protection
Nano RF Wireless RGBW LED controller
ModelN40N40-S
Electrical Specification
Working Voltage DC 5-24V 
Rated Output Current3x2.5+4A3x3.5+6A
Remote ControlRF wireless remote controller
Remote Control Frequency433.92MHz
Remote Control BatteryCR2032 3V cell battery
Remote Transmit Power<10dBm
Remote Distance>15 meters in open area
Remote Controller Matching ModeEach unit can be matched to 5 remote controllers
 / remote controller can be matched to any receiver
PWM Output Grade4000 Levels
PWM Frequency1KHz
Protection FunctionWrong wiring / Overload / Short circuit / Overheat
Working Temperature -30~60℃
IP GradeIP-40
Components & PCBSMD parts / 4-layer FR-4 pcb
Functions
White ControlIndependent, 10 Levels brightness
RGB Dynamic Mode43 modes
Dynamic Speed Level10 Levels
Static Color30 colors
Color Brightness Level5 Levels
Gentle FadingYes
Power Off MemoryYes
Power & LED Connector
Power ConnectorSlot screw terminal, max 17AWG each slot, two positive and two negative in parallel. 
LED ConnectorSlot screw terminal, max 17AWG each slot
Dimension & Weight
DimensionMain unit: 87x24x15mm, Remote: 86.5x36x7.5mm
Net Weight 39g  39g 



TAG:   Classic RF Overheat protection