XV50 Meshlink RGB+CCT Controller

XV Meshlink series LED controller is designed to drive constant voltage LED products in voltage range of DC8V-50V. It works with the Meshlink remote controller or wall panel. The Meshlink wireless protocol is based on Bluetooth mesh technology, multiple controllers can be synchronized and the wireless connection is much more reliable than traditional RF technology. User can turn on/off, set dynamic modes, set group working or adjust LED brightness conveniently via the remote controller or wall switch and touch panel. Original Wago connectors are used on this series and the working voltage can be up to 50V.

  • Control Mode:Meshlink Wireless
  • Output Mode:Contant Voltage PWM
  • Power Voltage:DC 12V
  • Output Current:5x8A(total max 24A)

n Introduction

      XV Meshlink series LED controller is designed to drive constant voltage LED products in voltage range of DC8V-50V. It works with the Meshlink remote controller or wall panel. The Meshlink wireless protocol is based on Bluetooth mesh technology, multiple controllers can be synchronized and the wireless connection is much more reliable than traditional RF technology. User can turn on/off, set dynamic modes, set group working or adjust LED brightness conveniently via the remote controller or wall switch and touch panel. Original Wago connectors are used on this series and the working voltage can be up to 50V.


Rayrun website

Rayrun website

n Features

Rayrun website

n Wiring Diagram

Rayrun website




TAG:   meshlink wide voltage teeth cable holder full protection
XV series MeshLink CV LED controller
ModelXV10XV20XV30XV40XV50
FunctionSingle Color
CV controller
CCT
CV controller
RGB
CV controller
RGBW
CV controller
RGB+CCT
CV controller
Electrical Specification
Working Voltage DC 8-50V 
Rated Output Current20A2x10A3x8A4x8A
(total max 24A)
5x8A
(total max 24A)
Wireless ConnectionBluetooth Low Energy mesh protocol
RF Band2.4GHz ISM band
Wireless Transmit Power<7dBm
Wireless Distance>15 meters at open area
PWM output grade4000 levels
PWM Frequency2KHz
Protection FunctionWrong wiring / Overload / Short circuit / Overheat
Working Temperature -30~60℃
Functions
Brightness Control0-100%, with gamma correction
Dynamic ModeYesN/AYes
Group FuntionYes, supported by remote controller
Synchronization between ControllersYes
OTA Update ServiceYes
Smooth FadingYes
Power off memoryYes
Power & LED Connector
Power ConnectorWago804 standard push connector
LED ConnectorWago804 standard push connector
Dimension & Weight
Dimension134x39x24mm
Net Weight 63g  63g  63g  64g  64g 



TAG:   meshlink wide voltage teeth cable holder full protection